德國LM6皮革水份測量儀

Applications

The humimeter LM6 leather moisture meter is a handheld moisture meter for measuring the moisture of leather in a nondestructive manner. It is well suited for all kinds of leather and various degrees of moisture - from wet to dry leather. The LM6 can be used during the whole leather manufacturing process in the tannery as well as in the leather trade or in leather processing companies.

Features

Measuring range 3% to 65% water content
Resolution: 0.1% water content; 0.5°C;
Measuring depth 5 mm
Operating temperature range: 0 to +40°C / 32 to 104°F
Automatic temperature compensation
Temperature can be set to °C or °F as required
Measurement within seconds without prior treatment of samples
Online function
Hold function
Manual saving of results, datalog for up to 10,000 logs with measuring point report
Large, well-lit LC display
Menu languages: English, German, Italian, French, Spanish, Russian and many others on request
Scope of supply: humimeter LM6 leather moisture meter with rubber protection cover and batteries,
wooden case and proof plate
Optional: humimeter USB data interface module with LogMemorizer measuring data recording and analysing software on USB flash drive incl. USB cable for PC, printer

Your benefits

Nondestructive measurement
Large measuring range from 3% to 65% water content
Measurement within seconds
High accuracy due to temperature compensation
Quick determination of the average
Menu languages: English, German, Italian, French, Spanish, Russian and many others on request
Bulk pack: 10 % special discount for an order of a bulk pack of 5 units

article no. 12158 humimeter LM6 leather moisture meter

ATTENTION: Especially for small, packed or sewn products we recommend the humimeter RH5 (Category Paper/Board)

Handling / measuring procedure

After selecting the appropriate calibration curve (depending on the leather density), press the humimeter LM6 on a leather pile with a thickness of at least 10mm. The display immediately shows the absolute leather moisture as well as the temperature. The measuring procedure does not destroy the leather surface in any way. By effecting various measurements in different areas of the leather hide, the average water content can be determined immediately

Benefit from the non-destructive measuring method and optimise your drying costs as well as servicing times by detecting eventual moisture fluctuations or moisture spots in time. The measuring values can be stored on the device, further information like batch number can be added. Via the optional USB interface the measuring values can be transferred to a PC, and via LogMemorizer ® PC software the data can be archived, exported, processed or printed out.

Accredited test laboratory:

In 2016 we established a test laboratory conforming to the requirements of the globally valid standard EN ISO/IEC17025:2005. In addition, the laboratory has been certified for the determination of water content according to EN ISO 4684: „Leather - Chemical tests - Determination of volatile matter“. The requirements necessary for obtaining and preserving the accreditation ensure maximum testing quality.

Accessories and Extensions

Art. No.	Picture	Accessory / Extension
12278		humimeter USB data interface module with LogMemorizer measuring data recording and analysing software on USB flash drive incl. USB cable for PC
11733		Thermo printer runs by battery,industrial model
10600		Factory calibration certificate Protocol documenting the calibration of material moisture meters before delivery