產品資料


X-PP伸縮測力儀
X-PP伸縮測力計儀
X-PP伸縮測力儀 規格

X-PP伸縮測力儀

Application: 

X-PP Force gauges calibrated in push-pull are available in four capacities in pounds ranging from 50 lb up to and including 2,500-0-2,500 lb and three metric capacities from 50 to 1,000 kg. Accuracy is ±2% of maximum dial reading (based upon total capacity of both compression and tension scales).

Model X-PP gauges in capacities up to and including 500 lb or 250 kg are supplied with a set of self-aligning spherical rod-end connectors for tension loading. Force is applied to connectors through a hardened steel pin which must be slip fit in connector holes.

2,500 lb and 1,000 kg capacity gauges are equipped with two shackle adapters, shackles and pins. Shackles must be removed when compression load is involved. Force is then applied against shackle pins in a suitable test setup.

All push-pull gauges are supplied with a compression-loading spherical ball fitting for compression loading.

Specifications:

Warranty 2 Years
Accuracy ±2%
Operating Temperature up to 120°F (48°C)
Overload rating Accidental overloads up to 30% of capacity can be safely sustained without injury to the dial indicator or deflection beam. All capacities feature a 5:1 design safety factor.

Force Ranges

Model Capacity Resolution
30795-0014 50 - 0 - 50 lb 1 lb
30796-0013 125 - 0 - 125 lb 2.5 lb
30798-0011 500 - 0 - 500 lb 10 lb
30800-0017 2,500 - 0 - 2,500 lb 50 lb
30796-0021 50 - 0 - 50 kg 1 kg
30798-0029 250 - 0 - 250 kg 5 kg
30800-0025 1,000 - 0 - 1,000 kg 20 kg
Low Beam Deflection
Capacity Deflection
50 - 250 lb (25 - 100 kg) 0.019"
500 lb (200 kg) 0.016"
1,000 lb (500 kg) 0.018"
2,000 lb (1,000 kg) 0.011"
5 and 10,000 lb (2 and 5,000 kg) 0.010"
25,000 b (10,000 kg) 0.022"
When measured across the center of top- and bottom-loading holes