產品資料


MH-275電動水平測試台
MH-275電動水平測試台
MH-275電動水平測試台 規格

MH-275電動水平測試台

Application: 

MH-275 - With Auto Cycle & Force Control

MH-275-S - With Auto Cycle, Force Control & Distance Meter

The new MH-275 motorized test stand is designed for tension, compression, and friction testing. Combination of screw system and state-of-the-art brushless motor provides extremely smooth and powerful operation over the entire speed range. Speed control, quick return and emergency stop are standard features.

The MH-275 accepts the DPS, Z2 & ZP force gauges, additional models require the AP-002 adapter plate.

High/Low Setpoint Force Control

When the force value reaches the Low setpoint, force control is activated to hold the tension or compression force between the High and Low setpoints programmed on the Imada Z Series force gauge. Use the optional digital timer to program the duration of the hold, up to 100 minutes in 1second increments. Ideal for non-destructive testing.

High Setpoint Force Control

When the force value reaches the Low setpoint, speed is reduced to the test speed set by the Speed Adjust Knob, and when the tension or compression force value reaches the High setpoint programmed on the Imada Z Series force gauge, the test stops. Ideal for creep testing.

Speed control, quick return and emergency stop are standard features. The MH-275 accepts any of the standard range Imada force gauges. Optional timer and digital distance meter available.

Features:

  • One stand for both compression (push) and tension (pull) tests
  • Jog, Single Cycle, Continuous Cycle(72 hour max.), Force Control
  • Digital Distance Meter Optional
  • No programming required
  • Combination of screw drive system and high performance brushless motor provides extremely smooth and powerful operation over the entire speed range.
  • Conditional Overload Prevention

Specifications:

Standard Speed 0.3 – 7 in/min
(10 - 292 mm/min)
Low Speed 0.2 - 4.2 in/min
(18 - 584 mm/min)
High Speed 0.6 - 15.7 in/min
(38 - 1194 mm/min)

 

Dimensions